SW-SJ301
Hits：45
SW-SJ301
Specification：AWS A5.17 F6A2 -EM12K
AWS A5.17 F6A0- EL8
GB/T 5293-2018 S 43A 2 CS-SU26
GB/T 5293-2018 S 43A 0 CS-SU08A
GB/T 36037-2018 S A CS 1
Introduction：
SJ301 is a kind of Silicon-Calcium type sintered flux,it has short slags and suitable for circular seam welding.
Mainly used in common steel structure and X42, X46 grade pipeline steel welding, submerge-arcwelding of gas storage tanks, gas bottles.
Pass the certification：
Contact us
Chemical Composition%：
| Mesh | Moisture% | Impure% | Flux% | ||
| S | P | ||||
| AWS | 10-60 | ≤0.10 | ≤0.30 | ≤0.035 | ≤0.040 |
| TR(HC) | 10-40 | 0.012 | 0.01 | 0.032 | 0.033 |
Typical Mechanical Properties of the Deposited Metal：
| Wire | Tensile Strength | Yield Strength | Elongation | Impact Value | |
| Mpa | Mpa | % | J / ℃ | ||
| TR(HC) | H08Mn / 4mm | 480 | 398 | 28 | 50/-20 |
Packing：
| Bag | Bucket | Ton Bag |
| 25kg (55 lbs) | 25kg (55 lbs) | 400kg (880 lbs) |
| √ | √ | √ |
Points for Attention：
1. Bake the flux at 300-350°C for 2 hours before use.
2. Remove rust, scale, primer, dirt, and spot welding slag on the base metal surface.
3. Regularly add fresh flux.
苏公网安备 32058202010273号