SW-SJ101
Hits：52
SW-SJ101
Specification：AWS A5.17 F7A4 EH14
AWS A5.17 F7A2 EM12K
GB/T 5293-2018 S 49A 4 FB-SU34
GB/T 5293-2018 S 49A 2 FB-SU26
GB/T 36037-2018 S A FB 1
ISO 14174-S A FB/AB 1
Introduction：
SJ101 is a kind of Fluoride-Alkaline type sintered flux,it has great capacity of sulphur removal, phosphor removal and anti-rust.
The metal welding seam has good plasto-toughness, with low reaction of hydrogen and fine cold and heat crack resistance.
With welding wires( H08MnA, H10Mn2,H08MnMoA,H08Mn2MoA), fits for welding of low-carben steel and low alloy steel, eg:Ship-building, Pressure boiler,pipeline.
Pass the certification：
CE 、LR、 CCS、 ABS
Chemical Composition
| Mesh | Flux check | ||||
| Moisture% | Impure% | S | P | ||
| AWS | 10-60 | ≤0.10 | ≤0.30 | ≤0.05 | ≤0.06 |
| TR(HC) | 10-40 | 0.015 | 0.018 | 0.032 | 0.038 |
Typical Mechanical Properties of the Deposited Metal
| Wire | Tensile Strength | Yield Strength | Elongation | Impact Value | |
| Mpa | Mpa | % | J / ℃ | ||
| TR(HC) | H10Mn2 / 4mm | 530 | 432 | 28 | 58/-20 |
Packing
| Bag | Bucket | Ton Bag |
| 25kg (55 lbs) | 25kg (55 lbs) | 400kg (880 lbs) |
| √ | √ | √ |
Points for Attention：
1. Bake the flux at 300-350°C for 2 hours before use.
2. Remove rust, scale, primer, dirt, and spot welding slag on the base metal surface.
3. Regularly add fresh flux.
苏公网安备 32058202010273号