SW-HJ260
Hits：46
SW-HJ260
Specification：GB/T17854-1999 F308-H0Cr21Ni10
Introduction：
HJ260 is a fused type low manganese-oxide flux with vitreous granule of gray color, about 10-60 mesh in size. It is suitable for use DC. The arc is stable and the bead appearance.
In combination with stainless steel wires ( such as H0Cr21Ni10,H0Cr21Ni10Ti,H3Cr13 etc) ,this flux is suitable for welding of appropriate acid resistance stainless steel structures, and is also suitable for surfacing of rolls.
Pass the certification：
Contact us
Chemical Composition%：
| Mesh | Moisture% | Impure% | Flux% | ||
| S | P | ||||
| AWS | 8-40 | ≤0.10 | ≤0.30 | ≤0.06 | ≤0.08 |
| TR(HC) | 12-40 | 0.013 | 0.02 | 0.045 | 0.037 |
Typical Mechanical Properties of the Deposited Metal：
| Wire | Tensile Strength | Yield Strength | Elongation | Impact Value | |
| Mpa | Mpa | % | J / ℃ | ||
| TR(HC) | H0Cr21Ni10 | 560 | - | 42 | - |
Packing：
| Bag | Bucket | Ton Bag |
| 25kg (55 lbs) | 25kg (55 lbs) | 400kg (880 lbs) |
| √ | √ | √ |
Points for Attention：
1. Bake the flux at 300-350°C for 2 hours before use.
2. Remove rust, scale, primer, dirt, and spot welding slag on the base metal surface.
3. Regularly add fresh flux.
Previous：SW-HJ431
Next：None！
苏公网安备 32058202010273号